Another success – STM Group returns to Kyrgyzstan!- Syrup room
We are proud to announce that our customer, SHORO, one of the leaders in the water and beverage market in Kyrgyzstan, is already using several of our bottling lines. Last year, they also chose a complete syrup room from us, which has proven to be very successful in their production.
Thanks to the high reliability and quality of our solutions, SHORO has once again placed its trust in us and placed an order for further components to increase its production capacity. We are currently working on expanding the functionality of the syrup room and adapting the bottling machines to a higher hygiene standard. This is an important step towards even safer and more advanced production.
🔧 What does the current expansion of the syrup room by STM Group involve?
🔹18,000 l/h product pasteuriser
🔹4 m³ buffer tank before the pasteuriser (TBC4)
🔹6 m³ buffer tank after the pasteuriser (TBC4)
🔹syrup pump system for a new bottling line
🔹full automation of tanks and pasteuriser
🔹HEPA filtration system
🔹ozonator based on a WEDECO generator for hygienic bottle rinsing
🔹CHART nitrogen applicator
We are grateful for the continued trust and opportunity to support SHORO’s development. Such partnerships drive us to action! 🤝
STM Group – engineering you can trust.
🌏 Another ARROW CAN machine that will be shipped around the world!
We are building another ARROW CAN machine that will be shipped around the world!
Our factory is busy constructing another machine from the ARROW CAN series — this time the ARROW CAN 14.2 model, which will go to a regular customer in South Korea.
It gives us great satisfaction when our partners return for more equipment, confirming the quality and reliability of our solutions.
🔧 ARROW CAN 14.2 – key design advantages:
✔ 14 electro-pneumatic isobaric fillers – independent control ensures perfect, repeatable dosing
✔ capacity up to 6000 cph
✔ AISI 316L in product contact areas – high hygiene, durability and resistance
✔ Integrated CO₂ and beverage proportional valves – perfect pressure and flow balance
✔ Stainless steel rotary seamer – guaranteed tight closure in every cycle
✔ Inert gas injection under the lid – better protection of product taste and quality
✔ Ergonomic, hygienic free-standing design – quick and easy service access
✔ Intelligent PLC panel – full process control from a touch interface
✔ 24/7 online support – we are with the customer every step of the way
Another machine, another continent, another satisfied customer who comes back for more. Work is ongoing – and we can’t wait for the ARROW CAN 14.2 to set off for Korea! 🤝
This is how we build brands and filling lines that work without compromise.
Another device coming soon – ISO EPV ARROW GLASS BEER 16.16.4
🎉 STM Group announces!
Another of our devices – ISO EPV ARROW GLASS BEER 16.16.4 – will soon leave the production hall and be shipped to one of the Polish breweries.
In a moment, we will reveal which of our regular customers has ordered another machine for their beer bottling line. This is a great honour for us and proof of the trust we work for every day.
🔧 ARROW GLASS 16/16/4 BEER EPV – key technical data:
🔹 RFC triblok: rinser + isobaric filler + capper
🔹 16-gripper rinser
🔹 16 electro-pneumatically controlled isobaric fillers (3-channel filler)
🔹 4 heads for crown caps
🔹 capacity up to 4500 bph
🔹 contact elements in AISI316L standard
🔹 double air evacuation
🔹 CO₂ injection before filling
🔹 CE compliant
🔹 vacuum pump with water ring
🔹 analogue pressure sensor
🔹 hot foaming device
Pride? — enormous.
Motivation? — even greater.
We will reveal more soon! 🚀💙
🍺 STM Group at the 2025 Brewers Symposium – join us!
On 8–10 December 2025, we will see you in Krakow during this year’s Brewers’ Symposium – one of the most important educational and networking events in the brewing industry. Once again, the meeting will be combined with the ‘KPR Kraft Roku 2025’ Craft Beer Competition and a festive final gala.
This year, STM Group will once again participate in the event, but will also actively contribute to its substantive part. Our Sales & R&D Director, Mateusz Kinda, will give an expert presentation:
🎤 ‘The intricacies of beer pasteurisation during bottling – a necessity? Or a conscious choice?’
During his presentation, Mateusz will discuss, among other things:
🔹 the differences between tunnel and flow pasteurisation,
🔹 process management and the most common mistakes,
🔹 microbiological hazards and the impact of pasteurisation on sensory properties,
🔹 media consumption and heat retention of packaging,
🔹 modern methods of PU measurement and systems protecting against excessive pasteurisation.
This is a unique opportunity to expand your knowledge of one of the key processes in beer production and talk to our team about the latest technologies in the industry.
In addition, we are proud to announce that STM Group is once again sponsoring the main prize in the KPR competition – the title of ‘KPR Dominators of the Year 2025’. We support craftsmen who are not afraid to reach for ambitious solutions and set new quality standards.
🍻 We invite all brewers, technologists, brewery owners and enthusiasts – see you in Krakow!
🎥✨ New video! See how one machine replaces three devices on the packaging line.
We present a solution that was designed and built to a special order for 3M, as their product requires an unusual approach.
The compact system combines:
🔹 case erector
🔹 case packer
🔹 case sealer
As a result, the entire process takes up much less space on the production floor and simplifies line logistics.
🔍 In most packaging systems, the product is placed in the carton from the top. In this case, we used the reverse packaging direction – from the bottom up (exactly as shown in the video).
Why?
➡️ To avoid the risk of the aerosol cap slipping off during the process.
➡️ To ensure stability and full control over the product at every stage. This solution is ideal not only for the aerosol industry, but also wherever a delicate, precise and unusual method of product feeding is required.
👉 If you would like to learn more or are considering a similar solution for your production line, please contact us at: contact@stm-pack.com
🔧📦 Aerosol packaging machine fully ready!
We are pleased to announce that the aerosol packaging machine dedicated to 3M has been fully assembled and is currently undergoing technical and performance tests! 🛠
The device is designed for the automatic packaging of aerosol cans in cartons – from the moment the cans enter the machine, through their placement in the carton – without touching the closure, sealing the top and bottom, to the final application of the logistics label. It is a complete, automated process that significantly improves the operation of the entire line. 📦⚙️
Each component of the device has been checked by our team of specialists and quality control – so that the final system is reliable and ready to work in demanding production conditions.
👉 If you would like more information or are interested in working with us, please contact us at: contact@stm-pack.com
🎉 STM Group article in Agro Industry No. 3!
We are proud to announce that STM Group’s publication entitled ‘Automation of filling lines in small and medium-sized breweries’ has been featured in the third issue of Agro Industry, dedicated to trends in brewing and the beverage industry. This is a great honour for us!
🔍 What are we writing about?
We show how automation is becoming crucial for small and medium-sized breweries – due to staff shortages, rising labour costs and market demands.
We describe STM Group’s implementations, including at Browar Nepomucen (the first craft brewery with a robot at the end of the line!) and Browar PINTA, where modern solutions have significantly increased productivity and reduced the workload on employees.
We highlight the benefits of automation:
🚀 higher productivity
🍺 better quality
💰 lower costs
📦 flexible packaging
🤖 process integration
We are proud to support the development of Polish craft beer! Look for us in the third issue of Agro Industry. 🍺
We would like to thank the editors of Agro Industry and invite you to read the magazine!
An incredible few days for STM Group at Gulfood Manufacturing 2025! ✨
Yesterday, we concluded the largest and most important event for the food, beverage and packaging technology industry in the Middle East, Africa and Asia.
This year’s edition was full of energy, inspiring conversations and exciting opportunities for the future of our industry 🌍🥫🍹
We would like to express our sincere gratitude to our STM Group representatives, Mateusz Kinda and Jan Gertchen, for their professionalism, commitment and excellent presentation of our engineering know-how and modern technologies that support the efficiency and automation of production processes in the beverage industry. 💪
We would also like to thank our team from the HTG Industry branch, represented by Hubert Zarzecki and Kaoutar Bossony, for the excellent organisation and preparation of the stand. Your work, creativity and attention to every detail made our presence in Dubai truly stand out. 🙌
These were fantastic days full of inspiring meetings, interesting business conversations and new contacts, confirming that innovation and cooperation are the key to the development of the entire industry. 🚀
Thank you to everyone who visited our stand — we are already looking forward to the next edition! 🤝
See you at the next trade fair!
🌍 The third and final day of Gulfood Manufacturing 2025!
The third and final day of Gulfood Manufacturing 2025!
🚀 If you didn’t come yet, today is your last chance to meet and choose the perfect filling line tailored just for you!
Yesterday, we had many interesting and inspiring meetings that showed us how dynamically the beverage production and bottling&canning industry is developing.
Today, from the very morning, we are back in full swing 💪 It is a unique moment to exchange experiences and build relationships that will turn into future projects.
You can find us here:
📍 Hall: SHK SAEED HALL 1
📍Stand: S1-C4
We look forward to seeing you together with our HTG Industry branch in Africa! 🌍
💥The second day of Gulfood Manufacturing 2025 for STM Group is in full swing! 💥
After the first day of the fair, full of meetings, discussions and inspiration, we invite you with even greater enthusiasm to the second day of the event to learn about the latest STM Group solutions for the bottling and canning industry.
If you have not visited our stand yet, we cordially invite you to do so!
📦 Hall: SHK SAEED HALL 1
🧭Stand: S1-C4
Our team will be happy to answer any questions and help you choose the right machine or design a complete bottling line – fully tailored to your needs.